Fan Filter Unit may be a self-contained ceiling unit for used in turbulent mixing and laminar pass cleanroom applications. Fan Filter Unit is made to provide filtered laminar airflow spanning a specific area. The unit integrates an excellent efficiency fan together a new HEPA/ULPA filter. The FFU draws in contaminated air with the top of the module, and exhaust filtered clean air vertically inside a laminar air stream on its base. FFU’s are generally used in the development of Class 1 to Class 100, 000 cleanrooms ( much like the US Federal Common 209E)
We developed FFU will be from basing upon that concepts including, to cut down running cost by protecting energy, and to decrease initial cost by overall design of clean place; such as noise specification and so on, to meet all certain requirements for constructing, operating, as well as maintaining cleanrooms. Our manufacturing capabilities cover anything from complete computerized sheet sheet metal design, to fabrication along with assembly. A vertically-integrated approach ensures that quality can be managed at every step in the way.
Product Characteristics
• Once and for good lubricated, direct-drive centrifugal blower.
• Easy fold, corrosion-resistant construction
• Wide range of ceiling grid system compatible
• Integral metal faceguard protects the HEPA/ULPA filtration from damage during set up and transportation.
• Fan inlet shield grille ensure operator basic safety during installation and avoids large objects from falling into the casing and damaging that blower
• Pre Filter on request
• Unique modular one-piece blower and electrical assembly is made be serviceable and effortlessly replaceable at lower upkeep costs.
• Standard unit shipped with 3 center electrical wires.
• Quiet operation of below 56dBA (measured at your distance of 1m from the unit at the normal airflow velocity of 0. 45m/s and also 90 FPM with standard AC blower. )
• Select conventional AC or electricity efficient EC Blowers Typical blower speed controller.
• Duct Collar 10” (250 mm) plus 12” (300 mm): allows direct link with the air air demanding fitness supply.
• Room-Side Alternative (RSR) available with gel seal filter element, filter is replacement on the roomside.
• Permanently lubricated, direct-drive centrifugal blower.
• Light weight, corrosion-resistant construction
• Wide range of ceiling grid system compatible
• Integral metal faceguard protects the HEPA/ULPA filter from damage during installation and transportation.
• Fan inlet guard grille ensure operator safety during installation and prevents large objects from falling into the casing and damaging the blower
• Pre Filter available on request
• Unique modular one-piece blower and electrical assembly is designed be serviceable and easily replaceable at lower maintenance costs.
• Standard unit shipped with 3 core electrical wires.
• Quiet operation of less than 56dBA (measured at a distance of 1m from the unit at the standard airflow velocity of 0.45m/s or 90 FPM with standard AC blower.)
• Choose from conventional AC or energy efficient EC Blowers Standard blower speed controller.
• Duct Collar 10” (250 mm) and 12 ” (300 mm): allows direct connection to the air air conditioning supply.
• Room-Side Replacement (RSR) available with gel seal filter element, filter is replacement from the roomside.