Fan Filter Unit is really a self-contained ceiling unit for easily use in turbulent mixing and laminar stream cleanroom applications. Fan Filter Unit was created to provide filtered laminar airflow over a specific area. The unit integrates an excellent efficiency fan together some sort of HEPA/ULPA filter. The FFU draws in contaminated air through the top of the module, and exhaust filtered clean air vertically in the laminar air stream during its base. FFU’s may be used in the development of Class 1 for you to Class 100, 000 cleanrooms ( down to the US Federal Standard 209E)
We developed FFU is from basing upon the actual concepts including, to reduce running cost by protecting energy, and to reduce initial cost by whole design of clean room; such as noise specification etc, to meet all what's needed for constructing, operating, and also maintaining cleanrooms. Our manufacturing capabilities range between complete computerized sheet shiny design, to fabrication along with assembly. A vertically-integrated approach helps to ensure that quality can be manipulated at every step of the way.
Product Characteristics
• Permanently lubricated, direct-drive centrifugal blower.
• Luxury, corrosion-resistant construction
• Wide range of ceiling grid process compatible
• Integral metal faceguard protects the HEPA/ULPA filter from damage during installation and transportation.
• Fan inlet protect grille ensure operator safety during installation and prevents large objects from falling in to the casing and damaging this blower
• Pre Filter on request
• Unique modular one-piece blower and electrical assembly is created be serviceable and without difficulty replaceable at lower preservation costs.
• Standard component shipped with 3 key electrical wires.
• Quiet operation of less than 56dBA (measured at any distance of 1m from the unit at the normal airflow velocity of 0. 45m/s as well as 90 FPM with typical AC blower. )
• Select from conventional AC or electrical power efficient EC Blowers Common blower speed controller.
• Duct Training collar 10” (250 mm) in addition to 12” (300 mm): allows direct link with the air air health and fitness supply.
• Room-Side Replacing (RSR) available with serum seal filter element, filter is replacement from your roomside.
• Permanently lubricated, direct-drive centrifugal blower.
• Light weight, corrosion-resistant construction
• Wide range of ceiling grid system compatible
• Integral metal faceguard protects the HEPA/ULPA filter from damage during installation and transportation.
• Fan inlet guard grille ensure operator safety during installation and prevents large objects from falling into the casing and damaging the blower
• Pre Filter available on request
• Unique modular one-piece blower and electrical assembly is designed be serviceable and easily replaceable at lower maintenance costs.
• Standard unit shipped with 3 core electrical wires.
• Quiet operation of less than 56dBA (measured at a distance of 1m from the unit at the standard airflow velocity of 0.45m/s or 90 FPM with standard AC blower.)
• Choose from conventional AC or energy efficient EC Blowers Standard blower speed controller.
• Duct Collar 10” (250 mm) and 12 ” (300 mm): allows direct connection to the air air conditioning supply.
• Room-Side Replacement (RSR) available with gel seal filter element, filter is replacement from the roomside.