Fan Filter Unit is usually a self-contained ceiling unit for use in turbulent mixing and laminar move cleanroom applications. Fan Filter Unit was designed to provide filtered laminar airflow on the specific area. The unit integrates an increased efficiency fan together some sort of HEPA/ULPA filter. The FFU draws in contaminated air in the top of the module, and exhaust filtered clean air vertically in a laminar air stream with its base. FFU’s are commonly used in the structure of Class 1 to help Class 100, 000 cleanrooms ( depending on the US Federal Typical 209E)
We developed FFU is from basing upon this concepts including, to decrease running cost by conserving energy, and to minimize initial cost by complete design of clean bedroom; such as noise specification and so forth, to meet all certain requirements for constructing, operating, and also maintaining cleanrooms. Our manufacturing capabilities range between complete computerized sheet steel design, to fabrication and assembly. A vertically-integrated approach makes quality can be governed at every step on the way.
Product Characteristics
• Once and for good lubricated, direct-drive centrifugal blower.
• Easy fold, corrosion-resistant construction
• Wide variety of ceiling grid system compatible
• Integral material faceguard protects the HEPA/ULPA sieve from damage during set up and transportation.
• Fan inlet guard grille ensure operator protection during installation and stops large objects from falling to the casing and damaging your blower
• Pre Filter available on request
• Unique modular one-piece blower and electrical assembly is designed be serviceable and quickly replaceable at lower protection costs.
• Standard component shipped with 3 central electrical wires.
• Quiet operation of under 56dBA (measured at the distance of 1m in the unit at the ordinary airflow velocity of 0. 45m/s or perhaps 90 FPM with ordinary AC blower. )
• Pick from conventional AC or vitality efficient EC Blowers Regular blower speed controller.
• Duct Scruff of the neck 10” (250 mm) plus 12” (300 mm): allows direct connection to the air air energetic supply.
• Room-Side Substitute (RSR) available with carbamide peroxide gel seal filter element, filter is replacement in the roomside.
• Permanently lubricated, direct-drive centrifugal blower.
• Light weight, corrosion-resistant construction
• Wide range of ceiling grid system compatible
• Integral metal faceguard protects the HEPA/ULPA filter from damage during installation and transportation.
• Fan inlet guard grille ensure operator safety during installation and prevents large objects from falling into the casing and damaging the blower
• Pre Filter available on request
• Unique modular one-piece blower and electrical assembly is designed be serviceable and easily replaceable at lower maintenance costs.
• Standard unit shipped with 3 core electrical wires.
• Quiet operation of less than 56dBA (measured at a distance of 1m from the unit at the standard airflow velocity of 0.45m/s or 90 FPM with standard AC blower.)
• Choose from conventional AC or energy efficient EC Blowers Standard blower speed controller.
• Duct Collar 10” (250 mm) and 12 ” (300 mm): allows direct connection to the air air conditioning supply.
• Room-Side Replacement (RSR) available with gel seal filter element, filter is replacement from the roomside.