Fan Filter Unit is a self-contained ceiling unit for easy use in turbulent mixing and laminar movement cleanroom applications. Fan Filter Unit was made to provide filtered laminar airflow more than a specific area. The unit integrates a top efficiency fan together your HEPA/ULPA filter. The FFU draws in contaminated air in the top of the module, and exhaust filtered clean air vertically in a very laminar air stream in its base. FFU’s are commonly used in the structure of Class 1 for you to Class 100, 000 cleanrooms ( much like the US Federal Standard 209E)
We developed FFU is usually from basing upon this concepts including, to reduce running cost by salvaging energy, and to cut down initial cost by complete design of clean place; such as noise specification or anything else, to meet all what's needed for constructing, operating, in addition to maintaining cleanrooms. Our manufacturing capabilities vary from complete computerized sheet metal design, to fabrication along with assembly. A vertically-integrated approach means that quality can be controlled at every step on the way.
Product Characteristics
• Forever lubricated, direct-drive centrifugal blower.
• Easy fold, corrosion-resistant construction
• Wide variety of ceiling grid technique compatible
• Integral metal faceguard protects the HEPA/ULPA filtration from damage during set up and transportation.
• Fan inlet shield grille ensure operator protection during installation and avoids large objects from falling into the casing and damaging this blower
• Pre Filter on request
• Unique modular one-piece blower and electrical assembly is made be serviceable and quickly replaceable at lower maintenance costs.
• Standard unit shipped with 3 primary electrical wires.
• Quiet operation of below 56dBA (measured at some sort of distance of 1m from your unit at the standard airflow velocity of 0. 45m/s or maybe 90 FPM with ordinary AC blower. )
• Choose from conventional AC or vitality efficient EC Blowers Standard blower speed controller.
• Duct Training collar 10” (250 mm) and also 12” (300 mm): allows direct connection to the air air energetic supply.
• Room-Side Alternative (RSR) available with gel seal filter element, filter is replacement on the roomside.
• Permanently lubricated, direct-drive centrifugal blower.
• Light weight, corrosion-resistant construction
• Wide range of ceiling grid system compatible
• Integral metal faceguard protects the HEPA/ULPA filter from damage during installation and transportation.
• Fan inlet guard grille ensure operator safety during installation and prevents large objects from falling into the casing and damaging the blower
• Pre Filter available on request
• Unique modular one-piece blower and electrical assembly is designed be serviceable and easily replaceable at lower maintenance costs.
• Standard unit shipped with 3 core electrical wires.
• Quiet operation of less than 56dBA (measured at a distance of 1m from the unit at the standard airflow velocity of 0.45m/s or 90 FPM with standard AC blower.)
• Choose from conventional AC or energy efficient EC Blowers Standard blower speed controller.
• Duct Collar 10” (250 mm) and 12 ” (300 mm): allows direct connection to the air air conditioning supply.
• Room-Side Replacement (RSR) available with gel seal filter element, filter is replacement from the roomside.