Fan Filter Unit is a self-contained ceiling unit for use in turbulent mixing and laminar flow cleanroom applications. Fan Filter Unit was created to provide filtered laminar airflow with a specific area. The unit integrates a superior efficiency fan together any HEPA/ULPA filter. The FFU draws in contaminated air with the top of the module, and exhaust filtered clean air vertically in the laminar air stream with its base. FFU’s may be used in the design of Class 1 for you to Class 100, 000 cleanrooms ( as per the US Federal Typical 209E)
We developed FFU is from basing upon the actual concepts including, to decrease running cost by saving energy, and to decrease initial cost by entire design of clean room; such as noise specification and so forth, to meet all certain requirements for constructing, operating, along with maintaining cleanrooms. Our manufacturing capabilities vary from complete computerized sheet sheet metal design, to fabrication as well as assembly. A vertically-integrated approach makes quality can be manipulated at every step from the way.
Product Characteristics
• For good lubricated, direct-drive centrifugal blower.
• Luxury, corrosion-resistant construction
• Wide variety of ceiling grid system compatible
• Integral metallic faceguard protects the HEPA/ULPA sift from damage during installment and transportation.
• Fan inlet safeguard grille ensure operator safe practices during installation and puts a stop to large objects from falling in to the casing and damaging the particular blower
• Pre Filter available on request
• Unique modular one-piece blower and electrical assembly is made be serviceable and easily replaceable at lower protection costs.
• Standard product shipped with 3 key electrical wires.
• Quiet operation of a lot less than 56dBA (measured at the distance of 1m on the unit at the common airflow velocity of 0. 45m/s or maybe 90 FPM with standard AC blower. )
• Select from conventional AC or power efficient EC Blowers Standard blower speed controller.
• Duct Scruff of the neck 10” (250 mm) and 12” (300 mm): allows direct connection to the air air health supply.
• Room-Side Substitute (RSR) available with teeth whitening gel seal filter element, filter is replacement on the roomside.
• Permanently lubricated, direct-drive centrifugal blower.
• Light weight, corrosion-resistant construction
• Wide range of ceiling grid system compatible
• Integral metal faceguard protects the HEPA/ULPA filter from damage during installation and transportation.
• Fan inlet guard grille ensure operator safety during installation and prevents large objects from falling into the casing and damaging the blower
• Pre Filter available on request
• Unique modular one-piece blower and electrical assembly is designed be serviceable and easily replaceable at lower maintenance costs.
• Standard unit shipped with 3 core electrical wires.
• Quiet operation of less than 56dBA (measured at a distance of 1m from the unit at the standard airflow velocity of 0.45m/s or 90 FPM with standard AC blower.)
• Choose from conventional AC or energy efficient EC Blowers Standard blower speed controller.
• Duct Collar 10” (250 mm) and 12 ” (300 mm): allows direct connection to the air air conditioning supply.
• Room-Side Replacement (RSR) available with gel seal filter element, filter is replacement from the roomside.