Fan Filter Unit can be a self-contained ceiling unit for easy use in turbulent mixing and laminar circulation cleanroom applications. Fan Filter Unit was made to provide filtered laminar airflow over a specific area. The unit integrates an increased efficiency fan together some sort of HEPA/ULPA filter. The FFU draws in contaminated air in the top of the module, and exhaust filtered clean air vertically in a very laminar air stream with its base. FFU’s may be used in the development of Class 1 that will Class 100, 000 cleanrooms ( according to the US Federal Standard 209E)
We developed FFU is definitely from basing upon the concepts including, to cut down running cost by salvaging energy, and to lower initial cost by overall design of clean space; such as noise specification for example, to meet all certain requirements for constructing, operating, plus maintaining cleanrooms. Our manufacturing capabilities vary from complete computerized sheet shiny design, to fabrication plus assembly. A vertically-integrated approach ensures that quality can be governed at every step on the way.
Product Characteristics
• Once and for all lubricated, direct-drive centrifugal blower.
• Lightweight, corrosion-resistant construction
• Number of ceiling grid system compatible
• Integral material faceguard protects the HEPA/ULPA sieve from damage during setting up and transportation.
• Fan inlet safeguard grille ensure operator safe practices during installation and inhibits large objects from falling in the casing and damaging the particular blower
• Pre Filter available on request
• Unique modular one-piece blower and electrical assembly is made be serviceable and easily replaceable at lower upkeep costs.
• Standard unit shipped with 3 primary electrical wires.
• Quiet operation of lower than 56dBA (measured at a distance of 1m with the unit at the standard airflow velocity of 0. 45m/s or maybe 90 FPM with ordinary AC blower. )
• Pick from conventional AC or electricity efficient EC Blowers Regular blower speed controller.
• Duct Scruff of the neck 10” (250 mm) plus 12” (300 mm): allows direct link with the air air fitness supply.
• Room-Side Substitute (RSR) available with serum seal filter element, filter is replacement in the roomside.
• Permanently lubricated, direct-drive centrifugal blower.
• Light weight, corrosion-resistant construction
• Wide range of ceiling grid system compatible
• Integral metal faceguard protects the HEPA/ULPA filter from damage during installation and transportation.
• Fan inlet guard grille ensure operator safety during installation and prevents large objects from falling into the casing and damaging the blower
• Pre Filter available on request
• Unique modular one-piece blower and electrical assembly is designed be serviceable and easily replaceable at lower maintenance costs.
• Standard unit shipped with 3 core electrical wires.
• Quiet operation of less than 56dBA (measured at a distance of 1m from the unit at the standard airflow velocity of 0.45m/s or 90 FPM with standard AC blower.)
• Choose from conventional AC or energy efficient EC Blowers Standard blower speed controller.
• Duct Collar 10” (250 mm) and 12 ” (300 mm): allows direct connection to the air air conditioning supply.
• Room-Side Replacement (RSR) available with gel seal filter element, filter is replacement from the roomside.