Gel Seal filter constructed with a built-in channel in the filter frame contains a non- flowing,non-hardening urethane gel sealant. Designed for framing systems and housing equipped with a “knife edge” seal. The knife edge inserts and submerges into the gel seal on the filter to prevent leakage Gel Seal are available in cell side (filter frame) depths of 3 1/8” (80mm). Reverse Gel Seal filters constructed with the built-in gel channel located at the back of the upstream side of the filter. Placing the channel in this position enables the filter to fit up into the housing to save space. Access to the filter is from the room side of the unit. Designed for housings and ducted modules equipped with a “knife edge” seal. The knife edge inserts and submerges into the gel seal on the filter to prevent leakage. Excellent replacement filter for permanently installed ducted ceiling modules. Reverse Gel Seal are available in cell side (filter frame) depths of 3”(75mm) and 3 7/8” (93mm)
Gel Seal filter constructed with a built-in channel in the filter frame contains a non- flowing,non-hardening urethane gel sealant. Designed for framing systems and housing equipped with a “knife edge” seal. The knife edge inserts and submerges into the gel seal on the filter to prevent leakage Gel Seal are available in cell side (filter frame) depths of 3 1/8” (80mm). Reverse Gel Seal filters constructed with the built-in gel channel located at the back of the upstream side of the filter. Placing the channel in this position enables the filter to fit up into the housing to save space. Access to the filter is from the room side of the unit. Designed for housings and ducted modules equipped with a “knife edge” seal. The knife edge inserts and submerges into the gel seal on the filter to prevent leakage. Excellent replacement filter for permanently installed ducted ceiling modules. Reverse Gel Seal are available in cell side (filter frame) depths of 3”(75mm) and 3 7/8” (93mm)
- Frame: Extruded Anodized Aluminum
- Media: Wet laid microfine glass paper
- Separator: Hot melt
- Sealant: Polyurethane
- Efficiency: 99.99%, 99.995%, 99.9995%
- Frame Type: Gel Seal and Reverse Gel Seal
- Max.Constant Temperature: 80℃ (170 ℉ )
- Recommended Final Resistance: 600Pa ( 2.4” W.G)
- Flammability: UL Classified
- Relative Humidity: 100%
- Frame: Extruded Anodized Aluminum
- Media: Wet laid microfine glass paper
- Separator: Hot melt
- Sealant: Polyurethane
- Efficiency: 99.99%, 99.995%, 99.9995%
- Frame Type: Gel Seal and Reverse Gel Seal
- Max.Constant Temperature: 80℃ (170 ℉ )
- Recommended Final Resistance: 600Pa ( 2.4” W.G)
- Flammability: UL Classified
- Relative Humidity: 100%